Produced with only the highest quality materials and rigorously tested at our NATA approved facility Amplimesh® SupaScreen® security screens are designed to withstand even the most aggressive would-be intruder, and everything nature can throw at them to boot.
For over 50 years, Amplimesh® security screen doors and windows have been tested in some of Australia’s harshest climactic conditions including surpassing an 8000hrs acetic acid salt spray milestone, an equivalent of over 25 years of usage.
Amplimesh® security screens are assembled into high quality door and window frames using our Amplimesh® patented ‘pressure fit’ mesh retaining system technology. This system prevents the door frame material from coming into contact with the stainless steel or aluminium security screens, thereby resisting galvanic corrosion and increasing the overall lifespan of your security screen product.
The Amplimesh® ‘pressure fit’ system uses no glue and has no visible fixings, giving your door/window a designer look and feel. No screws or clamps penetrate through the face of the security screen mesh, keeping the face of your security screen uncompromised. A dual purpose PVC ‘wrap around’ pressure fit co-extrusion allows for mesh retention and provides the ultimate protection from dissimilar metals coming into contact.
Window screens, when fitted by an authorised installer, meet the requirements of the fall prevention / protection of Openable Window standards (AS5203)
CARE AND MAINTENANCE
The finishes that are applied to Amplimesh® products are of high quality and are extremely durable and weather resistant. Like all fixtures around the home some maintenance is required to preserve the original appearance of the product.
Surfaces should be kept clean by prompt removal of all dust, dirt, grime and any foreign matter using clean water and a small amount of mild detergent. Do not under any circumstances use any abrasive type cleaning agent (Ajax or similar) or cleaning material (such as steel wool) as it will damage the anodised surface. Thoroughly wash off any residue of detergent with clean water.
Deposited grime absorbs moisture and holds it against the powder coated surface, damaging the coating. Surfaces should be kept clean by prompt removal of all dust, dirt, grime and any foreign matter using a soft sponge with clean water and a small amount of mild detergent. Thoroughly wash off any residue of detergent with clean water to avoid deterioration of the coating which will occur as a result of soap deposition. Do not under any circumstances use any abrasive type cleaning agent (Ajax or similar). If small scratches occur, they can be buffed out using a good quality car polish. Care must be taken to ensure the coated surface is not removed.
Frequency of cleaning is largely dependent on the location of the building. In most circumstances cleaning may be carried out every 3–4 months. Amplimesh® products installed close to more severe conditions, such as marine or industrial environments, should be cleaned every 2–4 weeks.
We’re so sure of the quality of our SupaScreen® security screen doors that we’ve backed them by a comprehensive 16 year warranty.
As with all commercial warranties, your Amplimesh® security screen door or window screen must be cared for with regular cleaning and maintenance. Giving your screen a little love and attention every few months will not only maintain your warranty but will keep your screen looking great and performing at maximum efficiency.